Paintball Sports Forum - sponsored by Paintball Sports, South Australia  

Go Back   Paintball Sports Forum - sponsored by Paintball Sports, South Australia > Paintball Tech Support > Tips, Tricks & Guides - For Newbies & Top Guns

Reply
 
Thread Tools Display Modes
  #1  
Old 15-07-2010, 04:01 AM
Skorch's Avatar
Skorch Skorch is offline
Sausage Strangler
 
Join Date: Sep 2008
Posts: 183
Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.Skorch is the Zen master.
Default RPG-7 Prop

Found a nifty guide to building a prop RPG-7 for our scenario games. I can't quote the source because its original author is Anonymous but here it is!



Here's what I used.

3' of 1.5" thick PVC Pipe
3 PVC threaded nipples (not exactly sure what they're really called)
1 vertical foregrip
1 funnel
1 trigger/grip from a springer pistol (Toy pistol, look or ask around and you can find them)
2 San Pellegrino (Look in Woolies or Foodland for something similar) plastic bottles
1 can of Krylon Brown
1 can of Krylon Camo Black
1 can of Krylon Camo Olive
1 can of Krylon Clear Coat
1 bottle of Gorilla Super Glue
2 ring clamps

Total cost: Roughly $40, mostly because of the paint. If I made more, I could probably do them for ~$22 each instead.

It assembly is pretty easy to figure out.

Paint the rear end of the tube brown, as well as your foregrip and the threaded nipples. Once dry, slide the nipples onto the tube and glue in place. Stuff the funnel down the back, and glue that in place as well.

Take your two San Pellegrino bottles, and cut them at about the middle. One should be longer than the other. Glue them together, this will be your rocket piece. Paint them.

Glue your vertical foregrip to the pipe, at the end of one of the nipples. Place your pistol grip just a few inches ahead of it.

Once your 'rocket' has dried, just glue that in place too. You can also use tape to secure it, and paint the tape.

I haven't gotten around to the sights, but I'll probably use a cheap red dot sight from a $10 springer. Mine might be a bit longer than the real thing, but I used pictures for reference. You can always make yours shorter before you start working on it. I ended up cutting about 5" off the back of mine.

Picture shown in this image is before the 5" was cut off.
__________________
Reply With Quote
  #2  
Old 15-07-2010, 09:33 AM
Dr_Kinky's Avatar
Dr_Kinky Dr_Kinky is offline
Zombie Hunter
Ops Group Member
 
Join Date: Nov 2007
Posts: 847
Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.Dr_Kinky is a force to be reckoned with.
Default

That's freaking awesome mate! Nice write up too

Looks like a great prop to have in the scenario games!
__________________
Jas: ...the whole thing flops around and has zero stiffness.


Reply With Quote
  #3  
Old 15-07-2010, 02:30 PM
buckaringa boy's Avatar
buckaringa boy buckaringa boy is offline
Grunt
 
Join Date: Jun 2009
Location: Tea Tree Gully
Age: 37
Posts: 93
buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.buckaringa boy requires no introduction.
Default

I likes!!!!!
__________________
Reply With Quote
  #4  
Old 25-08-2010, 11:33 AM
GTVAE86's Avatar
GTVAE86 GTVAE86 is offline
Unit 47
 
Join Date: Apr 2009
Location: Thebarton, SA
Posts: 91
GTVAE86 is just starting out.
Default

Now that is sexy. I would like to make one meself.
Reply With Quote
  #5  
Old 26-08-2010, 04:52 PM
silent_sniper99's Avatar
silent_sniper99 silent_sniper99 is offline
Special Forces
 
Join Date: Dec 2008
Location: northen suburbs
Posts: 242
silent_sniper99 knows how to lock and load.silent_sniper99 knows how to lock and load.
Default

hmm a few CO2 tanks a few nerfs and you might be able to make it work like a real one
__________________
it was an accident sir i was cleaning my nails with my knife and he ran backwards into me .....17 times
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10.5. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.